Lobometrics outdoor wireless networks

Safe point-to-point and
point-to-multipoint links
with Lobometrics
wireless IPSec VPNs

Its AlMgLi enclosure,
anodization and
triple layer rubber
sealing and
BD data connectors guarantee
superior outdoor protection
and durability

Its reflectant surface,
high thermal transfer alloy,
20mm outer and inner fins
and industrial grade electronics
gives Lobometrics the
widest operational
temperature range.

In point-to-point line
of sight links
(e.g. link between networks)
Lobometrics set of
high speed
full duplex protocols
deliver much faster
performance than WiMax
at a fraction of the
price.

Lobometrics carefully selects the latest generation of processors from Intel, IBM and MIPS to provide the most effective power/Watt performance and highest thermal envelopes. This processors combined with the enclosure high thermal design power (TDP) enables the best wireless throughput available in the market, with just a 7W TDP for a high load 150Mb/s device and operational at up to 100ºC.

Fast processors should be paired with fast radios. Lobometrics wireless servers use the latest chipsets from Atheros, who's leadership in wireless chip and total solution integration is unmatched. Its world’s leading experience and expertise in RF CMOS design and its single-chip radio kits enables Wi-Fi professionals access to the highest performance products.

Lobometrics devices pass through a electrolytic passivation process used to increase the thickness and density of the natural oxide layer on the surface increasing corrosion resistance and wear resistance. This protective film covers all the device surface inside out and guarantees excellent resistance in harsh environments

Electronics generate heat, and heat degrades performance, this is why Lobometrics products are designed from ground up to dissipate as much heat as possible through radiation. Its external array of 20mm comb or fin like protrusions increase the surface contact with the air, and thus the rate of heat dissipation.

To dissipate heat from the electronics to the air first it must be transferred to the enclosure, the air circulates inside the device by free convection (heat moves upwards) and the internal fins add internal surface and help to capture that heat. Once captured, this thermal energy transferred again by the enclosure to the air outside helped by the external fins.

Water tightness and protection is achieved through sealing of all joins and reinforced through a three layer synthetic rubber coating in all critical areas that resists moister, acids, abrasion, weathering, electrical shock, skidding/slipping and corrosion.

Power and data travel together through the Ethernet cable, the use of professional outdoor barrel data connectors gives better isolation, better PoE power conductivity and radically reduces short-circuit downtimes caused by moister or dust.

Vibrations can be generated by motors, mounting poles and towers exposed to wind, generators and a long list of very common hardware, and can decrease performance and dramatically degrade life of electronic systems, this is why all the electronics on Lobometrics devices are mounted on floating high frequency vibration absorbers. As a result, Lobometrics devices can be mounted almost anywhere.

Specs table list HERE